News

Development trend of mining cable technology

As we all know, the quality of a product is good or bad, its first characteristic is reflected in the appearance of the product quality. Any product or semi-finished product, in the production process must pay attention to the appearance, strict control. And check. The sheath of the sheath line is the appearance of the cable, so the appearance needs to be round and smooth, uniform luster, no eccentricity (not exceeding the prescribed deviation), no mechanical damage, squashed, no visible debris, bubbles, bubbles, obvious particles, bamboo section shape, twisted shape, etc. In addition to meeting the above quality requirements, the thickness of the sheath also has a certain impact on the quality of the internal cable.

When the photovoltaic cable in the operation process through a certain load current, will produce a certain amount of heat, with the increase of the cable load current, the cable surface temperature will be gradually higher, if not treated in time, the consequences can be imagined, such as PVC cable, to the core temperature of 70 degrees as the upper limit, the surface temperature will be 5-10 degrees lower, therefore, The surface temperature of photovoltaic cable is basically safe below 60 degrees. From the point of view of power maintenance, the lower the temperature, the better.

Rvv sheath line is an important part of our wire and cable. So it's not that Rvv sheath wires are not better than THHN wires and vice versa. What are the differences between the two, the two sheath lines are suitable for different applications, what are the differences between them?

Advantage analysis of aluminum alloy cable compared with ordinary cable